TYPE

UBEC-12A

Instruction：

5V/6V/7.4V output switchable!
LED working status indicator!
12A UBEC is an external voltage stabilizer，it works at the Switch Mode。It can obtain the suitable DC voltage from 7-25.5V input voltage for receivers and other devices, and steadily provide 12A current to supply power for receiver, gyro, and multi servos. Therefore, the 12A UBEC is very suitable for large electric fixed wing aircraft and helicopters which uses 4S or more batteries. With this UBEC, you can obtain the power for receivers from dynamic power without equipping independent battery pack for receivers.
1.Specifications：

1. Output：5V/12A, 6V/12A or 7.4V/12A (Changeable with an jumper);
2. Input：7-25.5V (2 to 6 cells Lipo battery pack, 6 to 16 cells NIMH battery pack);
3. Continuous output current：12A;
4. Burst output current：20A (≤15 Sec);
5. Ripple：＜35mVp-p(@8A/12V);
6. Size：58mm*38mm*18mm (L*W*H);
7. Weight：25g(Including the cable and the ferrite ring);

2.Features：

1. Designed with an advanced switching power supply control chip with overcurrent and overheat protection function, the max efficiency of the chip is up to 93% ；
2. The small size and the light weight make it very convenient to use；
3. Provide large output current, the continuous output current is 12A, and the burst output current is 20A,fully guarantee the power demand of equipment.；
4. Designed with a high quality switching power supply conversion chip, significantly reduce the electromagnetic interference and ensure the receiver works properly；
5. With ultra-wide input voltage range, works properly from 7V-25.5V (low voltage version)；
6. Shows the working status with an indicator(LED),Output: 5V,yellow LED on; 6V,yellow and red LED on; 7.4V,red LED on；